Dry

U-104 Aluminum-Filled MCU

A single-component, aluminum-filled, moisture-cured urethane, U-104 excels at protecting steel and other substrates from corrosion, even over pre-rusted surfaces. Because it bonds and encapsulates the substrate, it may not require aggregate blasting for surface preparation. It cures fast, easily allowing two coats in one day. With two or three coats, it can be used as […]

U-104 Aluminum-Filled MCU Read More »

U-109 Zinc Rich MCU

U-109 is a two-component, zinc-rich urethane primer for use on metal substrates in severe corrosive or salt environments or anywhere the substrate requires cathodic-type protection from its primer. Designed for easy application by brush, roller or spray, it provides long-term corrosion protection. When paired with U-166, U-499 or U-111 as a topcoat, it provides added

U-109 Zinc Rich MCU Read More »

U-111 Polyester Urethane Topcoat

CFI’s flagship topcoat, U-111 is a two-component polyester urethane finish coating for exterior applications. With outstanding chemical and abrasion resistance far better than most other epoxy and urethane coatings, this proven formula can withstand years of exposure to solvents and caustics, and is easily cleaned. It is the ideal coating for anti-graffiti applications when solvents

U-111 Polyester Urethane Topcoat Read More »

U-166 Acrylic Urethane

U-166 is an acrylic urethane finish coat designed for exterior application on a variety of substrates, including steel, aluminum and concrete. Non-yellowing and non-chalking, it offers good chemical and excellent weather resistance and gloss retention. It is offered in standard full gloss and semi-gloss colors and clear, and can be color-matched upon request.

U-166 Acrylic Urethane Read More »

U-3060 ESD Flexible Urethane ESD

Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance. Provides electrostatic dissipation by using next generation conductive pigments which will not lose efficacy over time like traditional carbon pigments.  Conductivity range is 106 to 108 ohms per square.

U-3060 ESD Flexible Urethane ESD Read More »

U-497 Zinc Rich Epoxy Primer

U-497 is a three-component, zinc-rich polyamide epoxy primer for use on metal substrates in severe corrosive or salt environments or anywhere the substrate requires cathodic-type protection from its primer. Designed for easy application by brush, roller or spray, it provides long-term corrosion protection. When paired with U-166, U-499 or U-111 as a topcoat, it provides

U-497 Zinc Rich Epoxy Primer Read More »

U-498 Polyamide Epoxy Topcoat

A two-component high-build, high-solids novolac epoxy, this proven U-Series™ topcoat is highly surface tolerant. It can be applied in damp environments; once it has air-cured – typically in 8 hrs – it may be returned to service in wet or even submerged environments. This topcoat provides good abrasion and chemical resistance, making it ideal for

U-498 Polyamide Epoxy Topcoat Read More »