An aluminum-ceramic coating formulated to readily polish to a reflective finish that remains bright and shiny up to 1100°F (593°C) without discoloring. Used on hot automotive components as an alternative to bright chrome plating.
Alseal HX Bright Aluminum/Ceramic Read More »
FlexRez 150 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion.
FlexRez 150 Flexible PUD Read More »
FlexRez 155 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion. Formulated to provide a low gloss finish.
FlexRez 155 Flexible Low-Gloss PUD Read More »
High temperature silicone coating. Protects steel in service temperatures up to 1200°F (649°C) Newest water-based silicone technology provides excellent properties with a low VOC Air dry characteristics offer ease of handling until placed in service
Siloxseal 350 High Temp Silicone Read More »
Silicone modified epoxy coating with enhanced thermal resistance capabilities. Excellent for protecting outdoor structural steel, pipes, and equipment from corrosion. Withstands operating temperatures of up to 400°F (204°C). Adheres well to difficult surfaces such as brass or copper.
Siloxseal 385 Mid Temp Silicone Read More »
A single-component, aluminum-filled, moisture-cured urethane, U-104 excels at protecting steel and other substrates from corrosion, even over pre-rusted surfaces. Because it bonds and encapsulates the substrate, it may not require aggregate blasting for surface preparation. It cures fast, easily allowing two coats in one day. With two or three coats, it can be used as
U-104 Aluminum-Filled MCU Read More »
U-109 is a two-component, zinc-rich urethane primer for use on metal substrates in severe corrosive or salt environments or anywhere the substrate requires cathodic-type protection from its primer. Designed for easy application by brush, roller or spray, it provides long-term corrosion protection. When paired with U-166, U-499 or U-111 as a topcoat, it provides added
U-109 Zinc Rich MCU Read More »
CFI’s flagship topcoat, U-111 is a two-component polyester urethane finish coating for exterior applications. With outstanding chemical and abrasion resistance far better than most other epoxy and urethane coatings, this proven formula can withstand years of exposure to solvents and caustics, and is easily cleaned. It is the ideal coating for anti-graffiti applications when solvents
U-111 Polyester Urethane Topcoat Read More »
U-166 is an acrylic urethane finish coat designed for exterior application on a variety of substrates, including steel, aluminum and concrete. Non-yellowing and non-chalking, it offers good chemical and excellent weather resistance and gloss retention. It is offered in standard full gloss and semi-gloss colors and clear, and can be color-matched upon request.
U-166 Acrylic Urethane Read More »
Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance. Provides electrostatic dissipation by using next generation conductive pigments which will not lose efficacy over time like traditional carbon pigments. Conductivity range is 106 to 108 ohms per square.
U-3060 ESD Flexible Urethane ESD Read More »
©2024 Coatings For Industry, Inc.
