Special Condition: Chemical Resistant

Alseal 143P High Temp Phenolic

Water-based one-component phenolic coating. Excellent adhesion and flow combined with a low perm film provide high insulative strength. Also exhibits high chemical resistance and operating temperatures to 400°F (204°C) continuous, peaking to 600°F (316°C). Cures at 400°F (204°C).

Alseal 189P High Temp Phenolic

Alseal 189P is a high temperature water-based two component phenolic / epoxy coating composition containing laminar orienting pigments.

Alseal 190P Phenolic/Urethane w/PTFE

Water-based one-component urethane modified phenolic with particulate PTFE for improved slip and release at temperatures up to 350°F (177°C) continuous, peaking to 500°F (260°C). Has excellent adhesion to most metals and improved flexibility over conventional phenolics.

Alseal 360 Silicate w/Graphite

A high-temperature coating composition containing a graphite blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up to 1200°F (649°C).

Alseal 370 Silicate DFL

A high-temperature coating composition containing a graphite/molybdenum disulfide blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up to 800°F (427°C).

Alseal 5200 Cr-Free Ceramic Topcoat

Alseal 5200 is a chromium-free ceramic topcoat for use over Alseal 5K basecoat. Topcoated systems are stable at temperatures up to 1100oF (593oC). Contact CFI for available colors.

Alseal 528 Inorganic Zirconia/Ceramic

A high-temperature coating composition containing zirconium oxide powder in an inorganic binder. Protects ferrous alloys against thermal oxidation and corrosion. Withstands service temperatures in excess of 2000°F (1093°C) and is very tolerant to thermal cycling.

Alseal 590 Inorganic Ceramic/PTFE

A two-component, high-temperature coating composition containing PTFE. Promotes release of hot or sticky parts and dirt for environments up to 550oF (288oC). Inorganic binder allows release of very difficult organic materials. Reduces friction while functioning as an anti-stick/anti-fouling sealer over Alseal 500, 518, and 519.

Alseal 591M Inorganic Ceramic/MoS2

A one-component, self-priming ceramic coating that contains particulate molybdenum disulfide.  Stable up to 800oF (427oC).  Self-priming, so it can also be used alone as a lubricant or release agent.

Alseal 598 Inorganic Ceramic

A high-temperature resistant inorganic coating composition for use over Alseal 500, 518, and 519. Enhances the smoothness of the Alseal basecoats and extends the long-term corrosion protection by retarding the sacrificial consumption of these coatings. Available in multiple colors.

Alseal 598SC Smooth Ceramic Topcoat

A modified version of Alseal 598 formulated to improve surface finish, only available in a clear/semi-translucent version. Lowers the surface finish 10 microinches or more when compared to standard Alseal 598.

Alseal 5K Cr-Free Inorganic Aluminum/Ceramic

A completely chromium-free aluminum ceramic coating with no known carcinogens, HAPs or VOCs, Alseal 5K provides sacrificial corrosion protection and heat oxidation protection to temperatures of 1100°F (593°C).

Alseal 5KTC Cr-Free Ceramic Topcoat

A chromium-free ceramic topcoat for use over Alseal 5K basecoat.  Topcoated systems are stable at temperatures up to 1100oF (593oC).  Contact CFI for available colors.

Alseal 625 Diffusion Aluminide

Alseal 625 is a slurry applied diffusion aluminide coating made of aluminum and silicon powder in an inorganic binder. The aluminide formed from diffusion into Cobalt or Nickel based alloys provides a very wear resistant and heat oxidation resistant surface.

Alseal DB-3 Silicone/Ceramic

Two-component water-based silicone-ceramic topcoat for use over Alseal basecoats. Chemically passivates and physically seals sacrificial corrosion resistant aluminum-ceramic basecoats, at temperatures up to 700oF (371oC).  Available in multiple colors.

Redilube 140 Phenolic w/MoS2

Redilube 140 is a high temperature solid film lubricant containing molybdenum disulfide in a water-based phenolic binder.

Redilube 150 Cr-Free Phenolic w/PTFE

Water-based one-component phenolic with particulate PTFE for improved slip and release at temperatures up to 400°F (204°C) continuous, peaking to 600°F (316°C). Has excellent adhesion to most metals combined with high chemical resistance.

Siloxseal 350 High Temp Silicone

High temperature silicone coating. Protects steel in service temperatures up to 1200°F (649°C) Newest water-based silicone technology provides excellent properties with a low VOC Air dry characteristics offer ease of handling until placed in service

U-104 Aluminum-Filled MCU

A single-component, aluminum-filled, moisture-cured urethane, U-104 excels at protecting steel and other substrates from corrosion, even over pre-rusted surfaces. Because it bonds and encapsulates the substrate, it may not require aggregate blasting for surface preparation. It cures fast, easily allowing two coats in one day. With two or three coats, it can be used as …

U-104 Aluminum-Filled MCU Read More »

U-111 Polyester Urethane Topcoat

CFI’s flagship topcoat, U-111 is a two-component polyester urethane finish coating for exterior applications. With outstanding chemical and abrasion resistance far better than most other epoxy and urethane coatings, this proven formula can withstand years of exposure to solvents and caustics, and is easily cleaned. It is the ideal coating for anti-graffiti applications when solvents …

U-111 Polyester Urethane Topcoat Read More »

U-571 100% Solids Novolac Epoxy

U-571 is best suited to applications subject to spills and splashes of acids and bases, epoxy novolacs offer enhanced resistance to chemicals. The 100 percent solids formulation offers zero V.O.C., low odor, and a high-build finish.

WearCOAT 100 Polyester Urethane Topcoat

Two component, polyester aliphatic urethane finish coating for high-performance flooring. Resists tire marking under the heaviest of loads, making it ideal for heavy wheeled-traffic applications Abrasion resistance is 3x better than standard epoxy flooring Non-yellowing, non-chalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties Provides excellent gloss retention and will continue …

WearCOAT 100 Polyester Urethane Topcoat Read More »

WearCOAT 2345 High-Wear Low VOC Urethane

Two component, high solids, low VOC, UV stable, high-wear urethane coating with a satin finish and light anti-slip texture. UV stable Excellent abrasion resistance Very low odor Good chemical resistance Light anti-slip texture

WearCOAT 570 100% Solids Novolac Epoxy

Two component, 100% solids, high-build novolac epoxy floor coating for surface protection against severe chemical attack. High chemical resistance, especially to acids Low VOC, low odor application Easily applied by brush or roller