Special Condition: Low VOC / Low Odor

Alseal 143P High Temp Phenolic

Water-based one-component phenolic coating. Excellent adhesion and flow combined with a low perm film provide high insulative strength. Also exhibits high chemical resistance and operating temperatures to 400°F (204°C) continuous, peaking to 600°F (316°C). Cures at 400°F (204°C).

Alseal 189P High Temp Phenolic

Alseal 189P is a high temperature water-based two component phenolic / epoxy coating composition containing laminar orienting pigments.

Alseal 220i Cr-Free Inorganic Aluminum/Ceramic

Alseal 220i is a single component, chrome-free coating composition formulated to protect ferrous alloys from both high temperature heat oxidation and at the same time offer sacrificial (cathodic) protection to the base metal.

Alseal 320 Urethane w/PTFE

A water-based polyurethane dispersion containing PTFE. Offers a high level of slip-and-release coupled with a room-temperature cure. Maximum service temperatures of 250°F (121°C).

Alseal 360 Silicate w/Graphite

A high-temperature coating composition containing a graphite blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up to 1200°F (649°C).

Alseal 370 Silicate DFL

A high-temperature coating composition containing a graphite/molybdenum disulfide blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up to 800°F (427°C).

Alseal 5050 Cr-Free Inorganic Aluminum/Ceramic

Alseal 5050 is a single component, chrome-free coating composition formulated to protect ferrous alloys from both high temperature heat oxidation and at the same time offer sacrificial (cathodic) protection to the base metal.

Alseal 5200 Cr-Free Ceramic Topcoat

Alseal 5200 is a chromium-free ceramic topcoat for use over Alseal 5K basecoat. Topcoated systems are stable at temperatures up to 1100oF (593oC). Contact CFI for available colors.

Alseal 5K Cr-Free Inorganic Aluminum/Ceramic

A completely chromium-free aluminum ceramic coating with no known carcinogens, HAPs or VOCs, Alseal 5K provides sacrificial corrosion protection and heat oxidation protection to temperatures of 1100°F (593°C).

Alseal 5KTC Cr-Free Ceramic Topcoat

A chromium-free ceramic topcoat for use over Alseal 5K basecoat.  Topcoated systems are stable at temperatures up to 1100oF (593oC).  Contact CFI for available colors.

FlexRez 150 Flexible PUD

FlexRez 150 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion.

FlexRez 155 Flexible Low-Gloss PUD

FlexRez 155 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion. Formulated to provide a low gloss finish.

Redilube 140 Phenolic w/MoS2

Redilube 140 is a high temperature solid film lubricant containing molybdenum disulfide in a water-based phenolic binder.

Siloxseal 350 High Temp Silicone

High temperature silicone coating. Protects steel in service temperatures up to 1200°F (649°C) Newest water-based silicone technology provides excellent properties with a low VOC Air dry characteristics offer ease of handling until placed in service

Sunlube 320 Urethane w/Wax Dispersion

Sunlube 320 is a single component non-toxic dry film lubricant consisting of a wax and a film forming polymer which holds the wax onto the surface, allowing for longer life than standard wax lubricants.

U-3013 Conductive Urethane

U-3013 is a single component water based aromatic urethane coating providing electrostatic discharge.

U-3060 ESD Flexible Urethane ESD

Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance. Provides electrostatic dissipation by using next generation conductive pigments which will not lose efficacy over time like traditional carbon pigments.  Conductivity range is 106 to 108 ohms per square.

U-3060 WB Flexible Urethane

Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance.

WearCOAT 1020 WB Epoxy Primer

Two component, water-based penetrating epoxy sealer/primer for protecting concrete surfaces. Quick cure provides a short time to overcoat Low viscosity allows penetration into the pores of concrete for increased adhesion Can be used as a primer, or as a final coat sealer

WearCOAT 1080 Moisture Mitigating Primer

Two component, 100% solids, moisture vapor tolerant epoxy primer for use on mechanically prepared concrete floors. Excellent in lowering moisture vapor pressure prior to applying standard coatings Effective for lowering moisture vapor transmission under resilient flooring and tile

WearCOAT 2020 Black Quick Cure Polyaspartic

Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor Pigmented black for use as mid coat, below top coat with metallic pigment

WearCOAT 2020 Quick Cure Polyaspartic

Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor High gloss finish

WearCOAT 2020 Quick Cure Polyaspartic + Flake

Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating with flake added. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor Used pigmented; yields high gloss finish  

WearCOAT 2020 Quick Cure Polyaspartic + Quartz

Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating with broadcast quartz added. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor Used clear; yields high gloss finish

WearCOAT 2020 Quick Cure Polyaspartic + Sand

Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating with sand added. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor

WearCOAT 2035 Slow Cure Polyaspartic

Two component, moderate cure speed, zero VOC, high solids, UV stable polyaspartic coating. Slower cure than conventional polyaspartic coatings reduces dry roller marks Highly UV stable Good abrasion resistance Very low odor High gloss finish

WearCOAT 2055 Long Cure Polyaspartic

Highly UV-stable, low VOC polyaspartic topcoat with extended 4-6 hour cure time to improve ease of application and help deliver a smooth surface.

WearCOAT 2345 High-Wear Low VOC Urethane

Two component, high solids, low VOC, UV stable, high-wear urethane coating with a satin finish and light anti-slip texture. UV stable Excellent abrasion resistance Very low odor Good chemical resistance Light anti-slip texture

WearCOAT 3015 WB Polyester Urethane

Single component, water-based, low odor, aliphatic urethane top coat. Durable, color-stable surface for foot and light-wheel traffic applications Very low odor Fast-dry with satin finish

WearCOAT 3030 Natural Sealer

Water-based clear concrete surface sealer.  This low-odor, fast cure sealer helps keep water, salts and stains from penetrating concrete and does not change the appearance of the surface.  Applies easily with return-to-service in as little as 4 hours.  For indoor or outdoor use on concrete, rock or slate-based surfaces.

WearCOAT 3045 Darkening Sealer

Excellent water-based sealer yields a wet-look previously only achieved with solvent-based acrylic sealers.  Low-odor, UV-resistant formula cures in as little as 4 hours.  Helps keep water, salts and stains from penetrating while giving a dark, wet appearance.  For indoor or outdoor use on concrete, rock or natural slate-type surfaces.

WearCOAT 440 100% Solids Epoxy

Two component, 100% solids epoxy floor coating. Formulated for general industrial flooring as an excellent high-build mid-coat Can be pigmented or used clear Ideal for use as a broadcast binder for flake, sand, or quartz media Very high resistance to amine blush making it ideal for application in most environments Also available in a fast …

WearCOAT 440 100% Solids Epoxy Read More »

WearCOAT 440FS 100% Solids Epoxy

Two component, 100% solids fast curing epoxy floor coating. Formulated for general industrial flooring as an excellent high-build mid-coat Can be pigmented or used clear Ideal for use as a broadcast binder for flake, sand, or quartz media Very high resistance to amine blush making it ideal for application in most environments Fast Set allows …

WearCOAT 440FS 100% Solids Epoxy Read More »

WearCOAT 460 100% Solids Epoxy

Two component, 100% solids high-build floor coating. Formulated for general industrial flooring as an excellent extra-high-build mid-coat Unique blend of additives provides a self-leveling coating in a high-build formulation; it rolls out quickly and easily, virtually eliminating heavy roller drag Pigmented Very high resistance to amine blush making it ideal for application in most environments

WearCOAT 481HP UV Stabilized Epoxy

Two component, light-stabilized, reduced yellowing, 100% solids high performance specialty epoxy floor coating. Offers good resistance to UV exposure; WearCOAT 481HP will yellow in color, but at half the rate of traditional epoxy floor coatings Good build properties Excellent flow and surface wetting with increased flexibility and resilience, offering about 30% better wear than conventional …

WearCOAT 481HP UV Stabilized Epoxy Read More »

WearCOAT 570 100% Solids Novolac Epoxy

Two component, 100% solids, high-build novolac epoxy floor coating for surface protection against severe chemical attack. High chemical resistance, especially to acids Low VOC, low odor application Easily applied by brush or roller

WearCOAT SG-4 Epoxy Anti-Slip

Two component, rapid curing, self-sealing, heavy duty, nonskid epoxy coating. Designed to provide the highest possible level of anti-slip properties Superior toughness and corrosion resistance Excellent chemical resistance

WearCOAT SG-LP WB Epoxy Anti-Slip

Two component, low VOC, waterborne epoxy with moderate grit. Designed for use in wet areas with heavy pedestrian grade traffic Ideal for use around pools, in locker rooms, showers, boats, docks, walkways, and decks