A two-component high-build, high-solids novolac epoxy, this proven U-Series™ topcoat is highly surface tolerant. It can be applied in damp environments; once it has air-cured – typically in 8 hrs – it may be returned to service in wet or even submerged environments. This topcoat provides good abrasion and chemical resistance, making it ideal for […]
U-498 Polyamide Epoxy Topcoat Read More »
Designed to be applied in many environments, even on damp surfaces, U-499 is a two-component polyamide epoxy with corrosion inhibiting pigments that helps prevent corrosion and attack from sea-water and chemicals. It will cure when cold, and when cured at normal temperatures, can be ready for immersion in as little as 8 hours.
U-499 Polyamide Epoxy Primer Read More »
U-571 is best suited to applications subject to spills and splashes of acids and bases, epoxy novolacs offer enhanced resistance to chemicals. The 100 percent solids formulation offers zero V.O.C., low odor, and a high-build finish.
U-571 100% Solids Novolac Epoxy Read More »
Two component, polyester aliphatic urethane finish coating for high-performance flooring. Resists tire marking under the heaviest of loads, making it ideal for heavy wheeled-traffic applications Abrasion resistance is 3x better than standard epoxy flooring Non-yellowing, non-chalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties Provides excellent gloss retention and will continue
WearCOAT 100 Polyester Urethane Topcoat Read More »
Two component, water-based penetrating epoxy sealer/primer for protecting concrete surfaces. Quick cure provides a short time to overcoat Low viscosity allows penetration into the pores of concrete for increased adhesion Can be used as a primer, or as a final coat sealer
WearCOAT 1020 WB Epoxy Primer Read More »
Two component, 100% solids, moisture vapor tolerant epoxy primer for use on mechanically prepared concrete floors. Excellent in lowering moisture vapor pressure prior to applying standard coatings Effective for lowering moisture vapor transmission under resilient flooring and tile
WearCOAT 1080 Moisture Mitigating Primer Read More »
Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor High gloss finish
WearCOAT 2020 Quick Cure Polyaspartic Read More »
Two component, moderate cure speed, zero VOC, high solids, UV stable polyaspartic coating. Slower cure than conventional polyaspartic coatings reduces dry roller marks Highly UV stable Good abrasion resistance Very low odor High gloss finish
WearCOAT 2035 Slow Cure Polyaspartic Read More »
Two-component, thin-film, low VOC, UV stable, high-wear urethane topcoat. Available in standard colors and clear; full gloss only. Ideally used as a finish coat over an epoxy or polyaspartic intermediate coat in heavy traffic environments where low VOC, low odor, and UV resistance are required. Highly UV stable topcoat Excellent abrasion resistance Very low odor
WearCOAT 2330 High-Wear Low VOC Urethane Read More »
Two component, high solids, low VOC, UV stable, high-wear urethane coating with a satin finish and light anti-slip texture. UV stable Excellent abrasion resistance Very low odor Good chemical resistance Light anti-slip texture
WearCOAT 2345 High-Wear Low VOC Urethane Read More »
©2025 Coatings For Industry, Inc.
