Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance.
U-3060 WB Flexible Urethane Read More »
Two component, aliphatic urethane, flexible, polyester type, finish coating for exterior applications. Extreme flexibility and toughness Excellent erosion resistance UV stable for extended weathering Adheres to a variety of substrates Good chemical resistance
U-313 Flexible Polyester Urethane Read More »
U-497 is a three-component, zinc-rich polyamide epoxy primer for use on metal substrates in severe corrosive or salt environments or anywhere the substrate requires cathodic-type protection from its primer. Designed for easy application by brush, roller or spray, it provides long-term corrosion protection. When paired with U-166, U-499 or U-111 as a topcoat, it provides
U-497 Zinc Rich Epoxy Primer Read More »
Designed to be applied in many environments, even on damp surfaces, U-499 is a two-component polyamide epoxy with corrosion inhibiting pigments that helps prevent corrosion and attack from sea-water and chemicals. It will cure when cold, and when cured at normal temperatures, can be ready for immersion in as little as 8 hours.
U-499 Polyamide Epoxy Primer Read More »
Two component, polyester aliphatic urethane finish coating for high-performance flooring. Resists tire marking under the heaviest of loads, making it ideal for heavy wheeled-traffic applications Abrasion resistance is 3x better than standard epoxy flooring Non-yellowing, non-chalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties Provides excellent gloss retention and will continue
WearCOAT 100 Polyester Urethane Topcoat Read More »
Two component, 100% solids, moisture vapor tolerant epoxy primer for use on mechanically prepared concrete floors. Excellent in lowering moisture vapor pressure prior to applying standard coatings Effective for lowering moisture vapor transmission under resilient flooring and tile
WearCOAT 1080 Moisture Mitigating Primer Read More »
Two component, fast-setting, zero VOC, high solids, UV stable polyaspartic coating. Fast cure for quick return to service UV stable Good abrasion resistance Very low odor High gloss finish
WearCOAT 2020 Quick Cure Polyaspartic Read More »
Two component, moderate cure speed, zero VOC, high solids, UV stable polyaspartic coating. Slower cure than conventional polyaspartic coatings reduces dry roller marks Highly UV stable Good abrasion resistance Very low odor High gloss finish
WearCOAT 2035 Slow Cure Polyaspartic Read More »
Two-component, thin-film, low VOC, UV stable, high-wear urethane topcoat. Available in standard colors and clear; full gloss only. Ideally used as a finish coat over an epoxy or polyaspartic intermediate coat in heavy traffic environments where low VOC, low odor, and UV resistance are required. Highly UV stable topcoat Excellent abrasion resistance Very low odor
WearCOAT 2330 High-Wear Low VOC Urethane Read More »
Two component, high solids, low VOC, UV stable, high-wear urethane coating with a satin finish and light anti-slip texture. UV stable Excellent abrasion resistance Very low odor Good chemical resistance Light anti-slip texture
WearCOAT 2345 High-Wear Low VOC Urethane Read More »
©2025 Coatings For Industry, Inc.
