Alseal 143P High Temp Phenolic
Water-based one-component phenolic coating. Excellent adhesion and flow combined with a low perm film provide high insulative strength. Also exhibits high chemical resistance and operating
Water-based one-component phenolic coating. Excellent adhesion and flow combined with a low perm film provide high insulative strength. Also exhibits high chemical resistance and operating
Alseal 189P is a high temperature water-based two component phenolic / epoxy coating composition containing laminar orienting pigments.
Alseal 220i is a single component, chrome-free coating composition formulated to protect ferrous alloys from both high temperature heat oxidation and at the same time
A water-based polyurethane dispersion containing PTFE. Offers a high level of slip-and-release coupled with a room-temperature cure. Maximum service temperatures of 250°F (121°C).
A high-temperature coating composition containing a graphite blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up to
A high-temperature coating composition containing a graphite/molybdenum disulfide blend in an inorganic binder. Air-dry coating protects mating parts from seizing and galling at temperatures up
Alseal 5050 is a single component, chrome-free coating composition formulated to protect ferrous alloys from both high temperature heat oxidation and at the same time
Alseal 5200 is a chromium-free ceramic topcoat for use over Alseal 5K basecoat. Topcoated systems are stable at temperatures up to 1100oF (593oC). Contact CFI
A two-component, high-temperature coating composition containing PTFE. Promotes release of hot or sticky parts and dirt for environments up to 550oF (288oC). Inorganic binder allows
A one-component, self-priming ceramic coating that contains particulate molybdenum disulfide. Stable up to 800oF (427oC). Self-priming, so it can also be used alone as a
FlexRez 150 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require
FlexRez 155 is a water based aliphatic polyurethane dispersion (PUD) and is intended for use as a binder for clear or pigmented coatings that require
Redilube 140 is a high temperature solid film lubricant containing molybdenum disulfide in a water-based phenolic binder.
Water-based one-component phenolic with particulate PTFE for improved slip and release at temperatures up to 400°F (204°C) continuous, peaking to 600°F (316°C). Has excellent adhesion
Water-based one-component urethane modified phenolic with particulate PTFE for improved slip and release at temperatures up to 350°F (177°C) continuous, peaking to 500°F (260°C). Has
Siloxseal 210 is a high temperature coating composition containing molybdenum disulfide in a silicone binder.
Siloxseal 225 is a high temperature solid film lubricant containing graphite in a silicone binder.
High temperature silicone coating. Protects steel in service temperatures up to 1200°F (649°C) Newest water-based silicone technology provides excellent properties with a low VOC Air
Silicone modified epoxy coating with enhanced thermal resistance capabilities. Excellent for protecting outdoor structural steel, pipes, and equipment from corrosion. Withstands operating temperatures of up
Sunlube 320 is a single component non-toxic dry film lubricant consisting of a wax and a film forming polymer which holds the wax onto the
A single component non-toxic, soft dry film lubricant consisting of a wax emulsion and wetting agents for use on metal and rubber surfaces.
U-217 is a two component solvent-based urethane modified silane coating. Exceptionally thin and high clarity coating does not change the appearance of the substrate Adheres
U-3013 is a single component water based aromatic urethane coating providing electrostatic discharge.
Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance. Provides electrostatic dissipation by using next
Water-based one-component aliphatic urethane coating that exhibits extreme elongation and flexibility for protecting fabric and textiles. Provides good erosion resistance.
Two component, aliphatic urethane, flexible, polyester type, finish coating for exterior applications. Extreme flexibility and toughness Excellent erosion resistance UV stable for extended weathering Adheres
©2023 Coatings For Industry, Inc.