Alseal®, Redilube®, Siloxseal® and Sunlube® coatings dry to provide a film that yields low-friction surfaces for metal-to-metal applications. Formulations are available to withstand operating temperatures up to 1600°F (871°C) while still resisting fretting and galling. Other formulations offer PTFE or wax additives to help provide high levels of release and/or low friction.

Alseal 320
A water-based polyurethane dispersion containing PTFE. Offers a high level of slip-and-release coupled with a room-temperature cure. Maximum service temperatures of 250°F (121°C).

Alseal 360 and Alseal 370 Cr-FREE
MoS2 and/or graphite in ceramic binder.

Alseal 590
PTFE in a ceramic binder.

Alseal 591M
A one-component, self-priming ceramic coating that contains particulate molybdenum disulfide. Stable up to 800oF (427oC). Self-priming, so it can also be used alone as a lubricant or release agent.

Redilube 140
Water-based one-component phenolic with molybdenum disulfide for improved slip, galling, and fretting at temperatures up to 400°F (204°C) continuous, peaking to 600°F (316°C). Has excellent adhesion to most metals combined with high chemical resistance.

Redilube 150
Water-based one-component phenolic with particulate PTFE for improved slip and release at temperatures up to 400°F (204°C) continuous, peaking to 600°F (316°C). Has excellent adhesion to most metals combined with high chemical resistance.

Redilube 225
Water-based one-component urethane modified phenolic with particulate PTFE for improved slip and release at temperatures up to 350°F (177°C) continuous, peaking to 500°F (260°C). Has excellent adhesion to most metals and improved flexibility over conventional phenolics.

Siloxseal 210 & Siloxseal 225 Cr-FREE
Graphite or MoS2 in a silicone binder stable to 500°F (260°C).

Sunlube
A single component non-toxic, soft dry film lubricant consisting of a wax emulsion and wetting agents for use on metal and rubber surfaces.

Sunlube 320
Water-based single-component urethane incorporating a wax dispersion to improve slip and release properties. Economical alternative to PTFE coatings where chemical resistance and the ultimate in slip or release is not necessary.

Coatings For Industry respects the importance of state and federal restrictions placed upon businesses and individuals to combat the COVID-19 virus. Although we are open, we fully support these measures and are exercising extensive precautions to prevent transmission.

Consistent with the State and Federal orders related to companies that provide products related to homeland security and the military, companies like CFI are deemed as “Essential Critical Infrastructure” and are permitted to continue operations.

While we cannot guarantee that new regulations won’t change our ability to remain operational, we will make every effort to meet customer needs.

As we navigate this threat to us all, CFI will promote conscientious behavior to meet both legal requirements and best-practice medical recommendations as they develop. Thank you for your loyalty during this extraordinary time.

See Our Thoughts About COVID-19…